New to jeep
Senior Member
Joined: Apr 2009
Posts: 954
Likes: 2
From: New Waverly, Tx
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
looks good. You even have the same roof rack.
https://www.cherokeeforum.com/f59/helpful-links-10052/ Post three shows the types.
https://www.cherokeeforum.com/f59/helpful-links-10052/ Post three shows the types.
Thread Starter
Senior Member
Joined: Mar 2011
Posts: 711
Likes: 0
From: provo, utah
Year: 1995
Model: Cherokee
Engine: 4.0
33 at's they rub a lil on sharp turns. im gonna take the rack of to fix a bend in it and re paint it
Last edited by Celticclove; Mar 29, 2011 at 10:37 AM.
Thread Starter
Senior Member
Joined: Mar 2011
Posts: 711
Likes: 0
From: provo, utah
Year: 1995
Model: Cherokee
Engine: 4.0
on front diff 40869249-4 rev-r on rear diff 43225131-4 rev-f can any one tell me what they are they both say dana on them but these are the only numbers i can find ????
Last edited by Celticclove; Mar 29, 2011 at 08:36 PM.
Senior Member
Joined: Apr 2009
Posts: 954
Likes: 2
From: New Waverly, Tx
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
each dif. should have a tag on it that looks like this. It tells the gear ratio. If it doesnt, it means some one has changed the gear oil or gears and didnt put it back on with the dif cover. There are other ways to find the gear ratio but involves taking off the dif. cover. The type of axle you have can be identified by its shape. The link I gave you shows the shapes. As far as those numbers, I dont have a clue. Your front axle is a Dana 30. Your back axle is either a Dana 35 or Chrysler 8.25.
Last edited by The Black; Mar 29, 2011 at 10:38 PM.
Senior Member
Joined: Apr 2009
Posts: 954
Likes: 2
From: New Waverly, Tx
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
Thread Starter
Senior Member
Joined: Mar 2011
Posts: 711
Likes: 0
From: provo, utah
Year: 1995
Model: Cherokee
Engine: 4.0
So I need to get all new bushing for all most all the steering parts . So do it just,walk on in to,the tards at the part store amd ask them or can any here give me a list if all the ones I need so I can tell them ?
Senior Member
Joined: Apr 2009
Posts: 954
Likes: 2
From: New Waverly, Tx
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
Your front is a Dana 30 and its good. Your back axle is a Dana 35 and is a POS.


