New guy from S. NH
#1
CF Veteran
Thread Starter
Join Date: Oct 2010
Location: Salem Nh
Posts: 1,756
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0
New guy from new hampshire
Hey everyone, new to the site. I got a 98 xj with 171k miles on it |6 4.0 completely rust free with a few of the common xj problems. but othere then that it runs great. i bought it about 2 years ago for 2700 with 140k miles on it. I hope to get a lot done to it before the snow falls. few plans for it before the snow are, lift, going with a rustys 3" AAL I feel like this is a good choice for me as i have no sag in the rear as of now and i feel like it will hold up good for the amount of off roading I do. Like to get some armor under it. and a few recovery points, and either a front bumper or a brush guard. havent done alot to it right now just slightly bigger tires, intake, exhuast, TB spacer, removed the rear swaybar and then basically what you can see from the pictures. along with some interior mods. i love it. my rig has never let me down, and plus i love being the only guy driving out on the road when we get the bad new england weather leave comments if you'd like or any advice you got. also if anyones in NH or norther Mass and wanna go wheeling send me a pm.
>most up to date photos of the rig
>some old photos
> My jeep broke through the ice if i went about 2 feet back there was a drop off and the water measured about 4 feet deep
>most up to date photos of the rig
>some old photos
> My jeep broke through the ice if i went about 2 feet back there was a drop off and the water measured about 4 feet deep
Last edited by jeepxj19; 10-20-2010 at 02:37 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jurazov
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
07-20-2023 04:13 AM
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
14
09-12-2015 05:39 PM
Jethro4days
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
09-05-2015 08:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)