Just joined the forum...
#1
Newbie
Thread Starter
Join Date: May 2014
Location: Arvada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 baby!
Just joined the forum...
After abusing the great resource of the forums I decided to finally join in the fun! I've been slowly working on (beating) my 2000 XJ back to life after a former owner neglected it for years. So far...
-New upper and lower ball joints
-Upgraded injectors to multiport
-Ripped out that freaking faulty factory alarm (arggg!)
-Full tune up
-Transmission flush
-Radiator flush
-Ripped off that oxidized trim and pin stripe
-Stripped down the roof (hail damage that was rusting) and put on 4 coats of truck bed liner
-Painted the factory wheels flat black
-Put on some locally made rock sliders
-Treated the front and rear bumper trim
-Front U-joints (go BFH)
-Flushed out front and rear diffs and transfer case
On to rear wheel bearings, valve and oil pan gaskets, bushings, steering linkage, and I want a new performance exhaust so I can be slightly obnoxious. Basically I'm broke and do what I can when I can. It's a fun hobby though!
-New upper and lower ball joints
-Upgraded injectors to multiport
-Ripped out that freaking faulty factory alarm (arggg!)
-Full tune up
-Transmission flush
-Radiator flush
-Ripped off that oxidized trim and pin stripe
-Stripped down the roof (hail damage that was rusting) and put on 4 coats of truck bed liner
-Painted the factory wheels flat black
-Put on some locally made rock sliders
-Treated the front and rear bumper trim
-Front U-joints (go BFH)
-Flushed out front and rear diffs and transfer case
On to rear wheel bearings, valve and oil pan gaskets, bushings, steering linkage, and I want a new performance exhaust so I can be slightly obnoxious. Basically I'm broke and do what I can when I can. It's a fun hobby though!
Thread
Thread Starter
Forum
Replies
Last Post
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
10-04-2015 06:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)