Just got my first jeep..
Thread Starter
Junior Member
Joined: Jan 2009
Posts: 81
Likes: 0
Model: Cherokee
Just got my first jeep..
Just got my first Jeep. It's a 1992 Cherokee Lerado. New transmission and nice leather interior 
I was wondering if it's worth converting to 4WD and the parts required. I own a Camaro Z28 so this I6 thing is kind of new to me. Anyways, the name's Mano. 
I was wondering if it's worth converting to 4WD and the parts required. I own a Camaro Z28 so this I6 thing is kind of new to me. Anyways, the name's Mano.
CF Veteran
Joined: May 2008
Posts: 2,495
Likes: 3
From: Edmond, OK
Year: 1993
Model: Cherokee
Engine: 4.0 ltr
Welcome... As far as converting to 4wd. The XJ Cherokees are probably one of the easiest. A front axle will bolt in, and you would need the 4wd trans and tcase and front and rear drive shafts. There are probably a few odds and ends that you will need. but as far as the big parts that should be it... I believe there are a couple of guys on here who may have already done this swap and would be able to tell you better...
CF Veteran
Joined: Nov 2008
Posts: 6,989
Likes: 4
From: Oak Harbor, WA.
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
Welcome to CF from Washington state!!
As far as converting a 2WD XJ to 4WD, it can be done. It's one of the easiest rigs around to make a 2WD version into a 4WD. If you're handy with a wrench and can do this yourself, just shop around for a 4WD XJ that doesn't run or has been hit in the rear in an accident. This would enable you to get the parts for a song, do the labor yourself and the front end parts you need would be in good shape.
As far as converting a 2WD XJ to 4WD, it can be done. It's one of the easiest rigs around to make a 2WD version into a 4WD. If you're handy with a wrench and can do this yourself, just shop around for a 4WD XJ that doesn't run or has been hit in the rear in an accident. This would enable you to get the parts for a song, do the labor yourself and the front end parts you need would be in good shape.
Renix Super Guru
Joined: Mar 2008
Posts: 24,653
Likes: 19
From: In yourz postez fissin jurr spelinzs
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Welcome from TEXAS. Prerunner is right but get the 4WD center console too.
Post specific questions in Cherokee Chat.
Post specific questions in Cherokee Chat.
)
Trending Topics
Seasoned Member
Joined: Sep 2008
Posts: 472
Likes: 0
From: Central Oklahoma
Year: 1997
Model: Cherokee (XJ)
Engine: 4.0
Welcome brother! The jeep is a easy beast to work on. If you have experience with twistin' wrenches, you can swap out the front axle, tranny etc. Good luck and keep us posted.
Thread
Thread Starter
Forum
Replies
Last Post
Rakkasan_Jeep
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
May 19, 2015 07:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)