Got my first Cherokee from Tx
Thread Starter
Newbie
Joined: Dec 2012
Posts: 22
Likes: 0
From: East TX
Model: Cherokee
Got my first Cherokee from Tx
Hey yall, names Gray. I just picked up my first cherokee, been wanting one forever.
its an 84 4 dr. 4x4 with the 2.8, had a cracked flexplate, parts are on order. Eventually itll get a built 3.4 swap... or a diesel...
Plan of attack is new flexplate, junkyard lift, got a set of 31x10.50 buckshots. stock wheels for now, trim the fenders, custom bumpers, removable doors, fab a set of tube doors, roof rack, cut out the rockers and replace with some 2x6, eventually it will get bigger and better but im keeping it low budget for now.
I am doing all the work myself, I am a diesel technician and this aint my first rodeo with building a vehicle. Im primarily a chevy guy, I cant own a ford or a dodge, or anything foreign. Ive always had a soft spot for jeeps, dads got a cj5 were putting a small block chevy in currently.
Im in East Tx, Tyler area, If theres any other fellow jeepers around here let me know, Id love to hit up some trails or just wrench on stuff!
Any suggestions, things I should do, let me know, like I said, this is my first cherokee!
heres a few pics of the 'Kee, not bad for 400$
And here are some of my other rigs
87 chevy, swapped in a 12 valve cummins with 5 speed. Its a pulling beast
and my last 4x4 build, first pic is when i got it, then when it was done.
84 gmc swb, 350/700r, 6" lift, 36s, cold a/c, 7mpg.
70 chevy, been in family since new, sat 28 years, 54k miles
Im glad to be here, looks like a good site, thanks for lookin
its an 84 4 dr. 4x4 with the 2.8, had a cracked flexplate, parts are on order. Eventually itll get a built 3.4 swap... or a diesel...
Plan of attack is new flexplate, junkyard lift, got a set of 31x10.50 buckshots. stock wheels for now, trim the fenders, custom bumpers, removable doors, fab a set of tube doors, roof rack, cut out the rockers and replace with some 2x6, eventually it will get bigger and better but im keeping it low budget for now.
I am doing all the work myself, I am a diesel technician and this aint my first rodeo with building a vehicle. Im primarily a chevy guy, I cant own a ford or a dodge, or anything foreign. Ive always had a soft spot for jeeps, dads got a cj5 were putting a small block chevy in currently.
Im in East Tx, Tyler area, If theres any other fellow jeepers around here let me know, Id love to hit up some trails or just wrench on stuff!
Any suggestions, things I should do, let me know, like I said, this is my first cherokee!
heres a few pics of the 'Kee, not bad for 400$
And here are some of my other rigs
87 chevy, swapped in a 12 valve cummins with 5 speed. Its a pulling beast
and my last 4x4 build, first pic is when i got it, then when it was done.
84 gmc swb, 350/700r, 6" lift, 36s, cold a/c, 7mpg.
70 chevy, been in family since new, sat 28 years, 54k miles
Im glad to be here, looks like a good site, thanks for lookin
Newbie
Joined: Dec 2012
Posts: 10
Likes: 0
From: Sacramento cali
Year: 1997
Model: Grand Cherokee
Engine: 5.2l V8
Hey fellow new member, I just signed up too and decided to look through some of the other intro threads and saw yours.
Glad i did because those are some nice rides man! U have some real prizes there! I hope u have fun wheelin with your new jeep
Glad i did because those are some nice rides man! U have some real prizes there! I hope u have fun wheelin with your new jeep
CF Veteran
Joined: Feb 2011
Posts: 3,074
Likes: 0
From: Bergen County, New Jersey U.S.A.
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
welcome to the site.... you might be interested to know a 350 could fit in that jeep.... I hated my 2.8 so underpowered but good around town... good luck with it 
Thread
Thread Starter
Forum
Replies
Last Post
Big Ray
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Aug 27, 2015 08:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
