Sunday afternoon the RattleCan (1996 XJ) would not start. Checking the battery cables I found my cables heavily corroded

Contacted XJwonders and by Thursday I had a complete battery cable set. Xcelent work!
Thanks XJwonders!

 

Received the cables today. They look great. They'll be going in Saturday morning. Thanks a lot.

 

Got my cables, very good work Thank you!

 

thank you for the kind words. I appreciate your business

 

Hey Neal,
How many amps are the 2AWG good for? My LS swap has a 160 or 145 amp alternator (I'll have to check). Is that going to be ok? I'll need a few custom lengths. I'll pm you when I can measure.

*edit - some quick research says it should be good for about 180 amps. What's the amp rating for the fuse you include?

 

according to this. 205 amps

 

the fuse is 150 amp. I can get 200 amp fuses

 

Here's a custom job I just did for a customer.

He wanted a set up so he can use his winch either in the front or in the rear.

 

how much is that? I'm wanting to do the same sometime. Also where is he running the cables? Down the "frame"? Thanks!

 

this is a 2 awg set. I advised him to not run anything less than 0 gauge toward the rear but he insisted on using 2 awg for everything. He paid $200 for the set up.

He has a 97 TJ.

 

so $200+ for anything on a cherokee? Just trying to figure out numbers and see when it would fit in and such.

 

that's for 2 awg. It would be more for 0 gauge. (Recommended because of the distance to the rear of jeep).

Shipping would be $18. Since it's so bulky.

 

Just made the cable set for a LS swap in a XJ.

 

These look legit, going to hit you up when I'm ready for some!

 

Gonna be heading out to Pittsburgh from south jersey this sunday and I could stop by and pick up a set if you have a 4AWG available. If not, ill be heading back from pittsburgh the following week