Hey guys, used my personal Cherokee to design and display these Raptor style sets I am making for all model XJs. If anyone's interested I have them on eBay, my store is under KMLgraphics, but I will offer a discount to anyone from the forums that wants a set as well. Feel free to email me also if interested.
I use either 3m or Avery 5-7 year+ so it holds up for a long time. I've been doing all sorts of vinyl for years now and these hold up as long as any I've used. I've had chip and scrapes in this matte black kind and it still doesn't peel off even when portions are damaged. I wet apply them so there's no bubbles then use a heat gun to set them in place and they're basically on there until you want to remove them. As long as the surface is prepped properly with this type of vinyl it pretty much won't come off once it's on unless you want it to.
Yes I could do sets like that, those are more universal and fit a variety of vehicles bc it's just a template that's made large enough to fit any really and require a lot of cutting to fit and look clean on all the edges once it's applied and a higher level of experience to install. I made this one as a lower priced set specifically to fit the Cherokees that anyone could install without any major mods to fit. But if anyone would want a set like that I should be able to do it also.
I will design and cut a larger side mud splash set like the previous image and install it on my XJ this weekend. That way there are both versions for anyone interested. I'll post pics once I get it all installed.
If it's not raining later today I'll get better pics outside, this set will be available for anyone who wants it as well as the previous one. This one is a pretty complex set to make and takes around 20 feet of vinyl and 20 feet of application tape to produce plus the time involved, so I'm thinking it will be around $175 for the full compete set