Mark this thread as Unsold
[FS] Front stubby/regular bumpers
#1
Member
Thread Starter
Join Date: Jan 2012
Location: Durham, N.C
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Front stubby/regular bumpers
Offering some bumpers for sale. I have been helping my son get his XJ how he wants it and figured others may be interested. Currently its a stubby made out of 3/16in for the bumper 1/4in for the mounts with D Ring tabs integrated made from 2 pieces 1/4 plate welded on both sides of the mounts making for a total of 3/4in, seems much stronger then the weld on tabs. These would all come unpainted.
Mounts to 7 existing holes per side on the frame, available options would be full length bumper, receiver hitch for winch and with standard mounts or the D Ring mounts.
Prices would be
200 for the stubby with standard mounts plus shipping
225 stubby with D Ring mounts plus shipping
250 for full length plus shipping
300 for the winch bumper plus shipping
adding a receiver hitch point to any of the bumpers would be an extra 30 dollars.
I checked with UPS and for me to ship from here, N.C to California it would be approximately 55 bucks, so I would say thats the maximum shipping could be.
I will have some pictures posted of the other options next weekend, but wanted to gauge any interest with the stubby version.
thanks
EDIT: Added new pictures of the full length and the winch one mounted. The full length is capped on the ends I just hadnt done it yet prior to mounting it.
If anyone is interested in the full length thats in the pictures I can do 225 plus shipping for that one only. If you look at the pictures you can see the drivers side sits a bit lower then the passenger side up near the grill. I didnt have it all the way in the jig I made and didnt realize it wasnt flush on the top till I already welded the bottom and side. Basically, if you dont mind a bumper a hair off its a decent deal. If no one is intersted I will cut it down to a stubby and sell it like that.
Mounts to 7 existing holes per side on the frame, available options would be full length bumper, receiver hitch for winch and with standard mounts or the D Ring mounts.
Prices would be
200 for the stubby with standard mounts plus shipping
225 stubby with D Ring mounts plus shipping
250 for full length plus shipping
300 for the winch bumper plus shipping
adding a receiver hitch point to any of the bumpers would be an extra 30 dollars.
I checked with UPS and for me to ship from here, N.C to California it would be approximately 55 bucks, so I would say thats the maximum shipping could be.
I will have some pictures posted of the other options next weekend, but wanted to gauge any interest with the stubby version.
thanks
EDIT: Added new pictures of the full length and the winch one mounted. The full length is capped on the ends I just hadnt done it yet prior to mounting it.
If anyone is interested in the full length thats in the pictures I can do 225 plus shipping for that one only. If you look at the pictures you can see the drivers side sits a bit lower then the passenger side up near the grill. I didnt have it all the way in the jig I made and didnt realize it wasnt flush on the top till I already welded the bottom and side. Basically, if you dont mind a bumper a hair off its a decent deal. If no one is intersted I will cut it down to a stubby and sell it like that.
Last edited by ducter; 05-09-2013 at 07:24 PM. Reason: pictures
#3
Member
Thread Starter
Join Date: Jan 2012
Location: Durham, N.C
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I am located in Durham, South Mills.. thats not far from Corolla right? Beautiful area.
I havent thought about a hidden winch version but might not be a bad idea. I was going to do a receiver version because I want my son to have a winch for those times he might need one...I will check into them though.
I havent thought about a hidden winch version but might not be a bad idea. I was going to do a receiver version because I want my son to have a winch for those times he might need one...I will check into them though.
#5
CF Veteran
Join Date: Oct 2011
Location: South Mills, NC
Posts: 1,812
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: Rebuilt 4.0L I6
I am located in Durham, South Mills.. thats not far from Corolla right? Beautiful area.
I havent thought about a hidden winch version but might not be a bad idea. I was going to do a receiver version because I want my son to have a winch for those times he might need one...I will check into them though.
I havent thought about a hidden winch version but might not be a bad idea. I was going to do a receiver version because I want my son to have a winch for those times he might need one...I will check into them though.
#7
Member
Thread Starter
Join Date: Jan 2012
Location: Durham, N.C
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Trending Topics
#12
Member
Thread Starter
Join Date: Jan 2012
Location: Durham, N.C
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
#13
Member
Thread Starter
Join Date: Jan 2012
Location: Durham, N.C
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
#15
Member
Thread Starter
Join Date: Jan 2012
Location: Durham, N.C
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
No, sorry. I am getting more metal in Thursday or Friday, if you have something particular in mind I will make one like that as I need another full to show a few guys anyways.
Thanks
Thanks