Hey guys, I am making some bumper brackets and figured I would see if anyone has an interest in them. They are cut from 1/4 inch plate with seven holes drilled for mounting. The ones pictured are for a 5 inch bumper that I am making but can make them any length you would like.

I am also going to make some with d-ring tabs with 2 1/4 inch plates welded per side for 3/4 total width. If you are interested just let me know. Please allow a day or two for me to get them cut out and shipped. Oh, shipping is for the lower 48 states and is included in the price.

Will also have some bumpers available for purchase soon as well, thinking about 300 plus shipping for them. I will post some pictures this weekend if I have time to finish one with the holiday.

EDIT: New brackets also available, scroll down a few post to see them attached to bumper.

thanks.

 

Id be interested in a set of d ring mounts depending on price. Or even a bumper once i see some pics.

 

Sounds good Keaton, I will try and get pictures of the mounts with the tabs and at least a bumper this weekend. Not sure how much time I can get in with Easter though as we have a family Easter egg hunt on Saturday and of course Easter on Sunday but I should have something worked up..

Thanks for the interest.

 

Heres a few pictures of the mounts with the D Ring tabs, as well as the bumper in its current state. My son wanted a stubby but he is not sure what he wants on the ends yet so we capped it off and will decide later, if anything.

Can do either mounts, the D Ring ones would be an additional 30 bucks as the require more fab work and metal.

Could do this bumper with various options like full length, hitch receiver and with the standard mounts instead of the D Ring mounts if someone preferred that.

I will start a thread on the bumpers.

 

How much for the bumper brackets?

 

The ones without the tabs would be 50, the ones with the tabs are 80. Both including shipping.

Thanks

 

Damn man, those look nice. For my Bumper I need brackets a couple inches longer than normal. If I were to give you a dimensioned drawing of what I need could you make them?

 

Yeah, if you needed some a bit different that's no problem.

Thanks

 

By the way, how are these cut? Can you do a radius on the d ring tab? Just wondering so I can decide how to design my brackets.

 

I cut them with a plasma cutter, can do whatever shape you want just give me something to go by is all.

Thanks

 

Still waiting for my set to arrive.

 

Hey David,

I sent you the tracking number on the 28th via pm, I just looked it up and it says its been in Atlanta since the 30th. I am not real sure what its doing, I am resending you the tacking number in case you dont have it in your box anymore and if it doesnt get to you in the next day or so I will cut you a new set and send them. I will deal with the postal service, not your responsibility to have to.

 

I'll call my local PO in the am & check also.

Thank you.

 

Are the holes already in the unibody of jeep or do they have to be drilled and bolted

 

Yes, all the holes are already in the unibody. One of the holes you can use, but I don't think you really have to its more just for extra insurance but I am not sure, is half way blocked by the sway bar mount but you can just cut that out and put a bolt through it. Attached is a picture of what I am talking about..

Like I said, I am not sure if its needed to put a bolt through there or not but it is drilled out in the mounts anyways if you decide to do so. Just ask the OP if you need to put a both through there or not, I'm sure he'll know.

I'm ducters son BTW