Mark this thread as Unsold
[FS] 4.6L Stroker Head 4 Sale
Thread Starter
Senior Member
Joined: Apr 2012
Posts: 638
Likes: 0
From: Huntsville, Tn
Year: Different Years (I have several XJ's)
Model: Cherokee
Engine: 4.0 HO
4.6L Stroker Head 4 Sale
I have a freshly built and machined 4.6L Stroker head for sale casting # 0630. This was built to go on a stroker I was going to build. I ran out of money after this was built and I can't finish the bottom end now! 
So my brokenness is your gain. Only asking $500 for completed head. It was built to go with this set-up:
----------------------------------------------------------------------------------------
Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
Custom forged +0.030" bore pistons, compression height 1.380", dish volume 18cc
9.6:1 CR
CompCams 68-231-4 206/214 degree camshaft
Russ Pottenger ported HO 2.00"/1.55" 62cc cylinder head
Mopar/Victor 0.043" head gasket
0.043" quench height
Ford 24lb/hr injectors with adjustable FPR or MAP adjuster for '87-'95 engines, Ford 24lb/hr injectors for '96-'04 engines, '99-'00 Chevy LS1 26.2lb/hr injectors for '05-'06 engines
268hp @ 4900rpm, 326lbft @ 3500rpm
So my brokenness is your gain. Only asking $500 for completed head. It was built to go with this set-up:----------------------------------------------------------------------------------------
Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
Custom forged +0.030" bore pistons, compression height 1.380", dish volume 18cc
9.6:1 CR
CompCams 68-231-4 206/214 degree camshaft
Russ Pottenger ported HO 2.00"/1.55" 62cc cylinder head
Mopar/Victor 0.043" head gasket
0.043" quench height
Ford 24lb/hr injectors with adjustable FPR or MAP adjuster for '87-'95 engines, Ford 24lb/hr injectors for '96-'04 engines, '99-'00 Chevy LS1 26.2lb/hr injectors for '05-'06 engines
268hp @ 4900rpm, 326lbft @ 3500rpm
Last edited by LawDog9; Nov 5, 2016 at 03:57 PM.
Thread Starter
Senior Member
Joined: Apr 2012
Posts: 638
Likes: 0
From: Huntsville, Tn
Year: Different Years (I have several XJ's)
Model: Cherokee
Engine: 4.0 HO
I have a freshly built and machined 4.6L Stroker head for sale casting # 0630. This was built to go on a stroker I was going to build. I ran out of money after this was built and I can't finish the bottom end now! So my brokenness is your gain. Only asking $500 for completed head. It was built to go with this set-up:
----------------------------------------------------------------------------------------
Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
Custom forged +0.030" bore pistons, compression height 1.380", dish volume 18cc
9.6:1 CR
CompCams 68-231-4 206/214 degree camshaft
Russ Pottenger ported HO 2.00"/1.55" 62cc cylinder head
Mopar/Victor 0.043" head gasket
0.043" quench height
Ford 24lb/hr injectors with adjustable FPR or MAP adjuster for '87-'95 engines, Ford 24lb/hr injectors for '96-'04 engines, '99-'00 Chevy LS1 26.2lb/hr injectors for '05-'06 engines
268hp @ 4900rpm, 326lbft @ 3500rpm
So my brokenness is your gain. Only asking $500 for completed head. It was built to go with this set-up:----------------------------------------------------------------------------------------
Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
Custom forged +0.030" bore pistons, compression height 1.380", dish volume 18cc
9.6:1 CR
CompCams 68-231-4 206/214 degree camshaft
Russ Pottenger ported HO 2.00"/1.55" 62cc cylinder head
Mopar/Victor 0.043" head gasket
0.043" quench height
Ford 24lb/hr injectors with adjustable FPR or MAP adjuster for '87-'95 engines, Ford 24lb/hr injectors for '96-'04 engines, '99-'00 Chevy LS1 26.2lb/hr injectors for '05-'06 engines
268hp @ 4900rpm, 326lbft @ 3500rpm
Thread Starter
Senior Member
Joined: Apr 2012
Posts: 638
Likes: 0
From: Huntsville, Tn
Year: Different Years (I have several XJ's)
Model: Cherokee
Engine: 4.0 HO
I have a freshly built and machined 4.6L Stroker head for sale casting # 0630. This was built to go on a stroker I was going to build. I ran out of money after this was built and I can't finish the bottom end now! So my brokenness is your gain. Only asking $500 for completed head. It was built to go with this set-up:
----------------------------------------------------------------------------------------
Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
Custom forged +0.030" bore pistons, compression height 1.380", dish volume 18cc
9.6:1 CR
CompCams 68-231-4 206/214 degree camshaft
Russ Pottenger ported HO 2.00"/1.55" 62cc cylinder head
Mopar/Victor 0.043" head gasket
0.043" quench height
Ford 24lb/hr injectors with adjustable FPR or MAP adjuster for '87-'95 engines, Ford 24lb/hr injectors for '96-'04 engines, '99-'00 Chevy LS1 26.2lb/hr injectors for '05-'06 engines
268hp @ 4900rpm, 326lbft @ 3500rpm
So my brokenness is your gain. Only asking $500 for completed head. It was built to go with this set-up:----------------------------------------------------------------------------------------
Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
Custom forged +0.030" bore pistons, compression height 1.380", dish volume 18cc
9.6:1 CR
CompCams 68-231-4 206/214 degree camshaft
Russ Pottenger ported HO 2.00"/1.55" 62cc cylinder head
Mopar/Victor 0.043" head gasket
0.043" quench height
Ford 24lb/hr injectors with adjustable FPR or MAP adjuster for '87-'95 engines, Ford 24lb/hr injectors for '96-'04 engines, '99-'00 Chevy LS1 26.2lb/hr injectors for '05-'06 engines
268hp @ 4900rpm, 326lbft @ 3500rpm
Thread Starter
Senior Member
Joined: Apr 2012
Posts: 638
Likes: 0
From: Huntsville, Tn
Year: Different Years (I have several XJ's)
Model: Cherokee
Engine: 4.0 HO