4.6L Stroker Head 4 Sale
I have a freshly built and machined 4.6L Stroker head for sale casting # 0630. This was built to go on a stroker I was going to build. I ran out of money after this was built and I can't finish the bottom end now! :( So my brokenness is your gain. Only asking $500 for completed head. It was built to go with this set-up:
---------------------------------------------------------------------------------------- Jeep 4.2L 3.895" stroke crank Jeep 4.0L 6.125" rods Custom forged +0.030" bore pistons, compression height 1.380", dish volume 18cc 9.6:1 CR CompCams 68-231-4 206/214 degree camshaft Russ Pottenger ported HO 2.00"/1.55" 62cc cylinder head Mopar/Victor 0.043" head gasket 0.043" quench height Ford 24lb/hr injectors with adjustable FPR or MAP adjuster for '87-'95 engines, Ford 24lb/hr injectors for '96-'04 engines, '99-'00 Chevy LS1 26.2lb/hr injectors for '05-'06 engines 268hp @ 4900rpm, 326lbft @ 3500rpm |
Originally Posted by LawDog9
(Post 3324948)
I have a freshly built and machined 4.6L Stroker head for sale casting # 0630. This was built to go on a stroker I was going to build. I ran out of money after this was built and I can't finish the bottom end now! :( So my brokenness is your gain. Only asking $500 for completed head. It was built to go with this set-up:
---------------------------------------------------------------------------------------- Jeep 4.2L 3.895" stroke crank Jeep 4.0L 6.125" rods Custom forged +0.030" bore pistons, compression height 1.380", dish volume 18cc 9.6:1 CR CompCams 68-231-4 206/214 degree camshaft Russ Pottenger ported HO 2.00"/1.55" 62cc cylinder head Mopar/Victor 0.043" head gasket 0.043" quench height Ford 24lb/hr injectors with adjustable FPR or MAP adjuster for '87-'95 engines, Ford 24lb/hr injectors for '96-'04 engines, '99-'00 Chevy LS1 26.2lb/hr injectors for '05-'06 engines 268hp @ 4900rpm, 326lbft @ 3500rpm |
Originally Posted by LawDog9
(Post 3324948)
I have a freshly built and machined 4.6L Stroker head for sale casting # 0630. This was built to go on a stroker I was going to build. I ran out of money after this was built and I can't finish the bottom end now! :( So my brokenness is your gain. Only asking $500 for completed head. It was built to go with this set-up:
---------------------------------------------------------------------------------------- Jeep 4.2L 3.895" stroke crank Jeep 4.0L 6.125" rods Custom forged +0.030" bore pistons, compression height 1.380", dish volume 18cc 9.6:1 CR CompCams 68-231-4 206/214 degree camshaft Russ Pottenger ported HO 2.00"/1.55" 62cc cylinder head Mopar/Victor 0.043" head gasket 0.043" quench height Ford 24lb/hr injectors with adjustable FPR or MAP adjuster for '87-'95 engines, Ford 24lb/hr injectors for '96-'04 engines, '99-'00 Chevy LS1 26.2lb/hr injectors for '05-'06 engines 268hp @ 4900rpm, 326lbft @ 3500rpm |
pics ?
|
Originally Posted by scooterc
(Post 3336607)
pics ?
|
All times are GMT -5. The time now is 07:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands