Ouch!

I'm going tomorrow.

 

I'd like to get on the list. my drums are getting very thin.

 

May 20th list
-askingforxit
-SnailTrail
- hasc
-m2carbine
-talltodd

June 22 list
-BenJammin25
-TimmyXJ
-AnarchyBurger
-94XjSport94
-Jeephater


July 27 list
-jeepersanch



Went to the JY today.I will be PM'ing folks soon.

 

David... You da'man!! Where do you find all these salvaged Grand Cherokees?!?!?

 

Those snipped brake line caliper nuts are on there good. I had to get a new caliper hose because I busted it trying to get it out! Just a word of caution to those doing this project

 

I got REAL lucky.


A far as the brake line nut, I put mine in a vice & used vise grips on the nut.

 

Hey, for those who have completed this job..I'm having a little trouble with the two pieces where the parking brake cable hooks up to. Related post

https://www.cherokeeforum.com/f67/zj...-wrong-171211/

If anyone could guide me in the right direction I do appreciate it

 

Got it figured out...And finally have discs on!!!!!

Thanks again, Big Dave!

 

I will take a set if you still have some available.

 

Thanks.

As long as JY's have them, I will have them for sale.

 

June list:
-TallTodd
-BenJammin'
-jeepersanch
-LPIII
-rklettke

I think that is right. Sorry if it's not, please correct me.

 

How much for a complete kit and shipping to 46394?

 

$170 anywhere in the lower 48, slightly higher in the other 2.

 

Put me on the list and I would take any open spot above me.
Thanks.

 

I will.


Side note:
I am also thinking about offering WJ front knuckles & Akebono calipers used in the WJ brake upgrade on the TJ, ZJ, & XJ Dana 30.The Akebono calipers were only offered on the WJ for the '03 & '04 models. They are somewhat hard to come by in the JY's.

I'll be honest, this is not as easy a swap as the rear disc's but many people notice a vast improvement over the stock braking system.

The kit will include driver, passenger knuckles, calipers, mounts & bolts for calipers . You would need to source the remaining parts- rotors, spacers, brake lines, & whatever else you need- plus you'll need parts to convert your steering over. I highly suggest you familiarize yourself with the process involved for install.

I would like to see if anyone is interested. The price would be $200 shipped to anywhere in the lower 48.