Mark this thread as Unsold
FS[SouthEast]: Brand new rustys shocks
#1
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Brand new rustys shocks
These are Brand New RX-11 shocks. 17.5" collapsed 29.82" extended. Intended for 6-8" lifts-rear shocks, not fronts.
Couldnt use them with my hoops. I cut the shock bushings on one of them to try and fit in the brackets i had welded on, but the body of the shock wouldnt work with my holes in the floor. The trimmed bushing wont affect the shock with a BPE on it up top or on the axle end. (I basically took off 1/8" or so of the length.
$33 each plus shipping new, $60 shipped from me.
Lets sell these bastards.
Couldnt use them with my hoops. I cut the shock bushings on one of them to try and fit in the brackets i had welded on, but the body of the shock wouldnt work with my holes in the floor. The trimmed bushing wont affect the shock with a BPE on it up top or on the axle end. (I basically took off 1/8" or so of the length.
$33 each plus shipping new, $60 shipped from me.
Lets sell these bastards.
#5
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
They arent used, i never ran them. They have just been moved around my shop. The bushings are trimmed on that one shock, but that wont effect you using a BPE, bar pin, or a sleeve for a bolt in any way.
What? $50 shipped for brand new shocks?
#6
Senior Member
Join Date: Oct 2011
Location: Cape May, NJ
Posts: 729
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Grand Cherokee
Engine: 4.0
they arent brand new. if I order brand new shocks I will get it without a cut bushing and vise grip marks all over the eye. nvm man good luck with your sale. I was looking for a quick band aid til i could get my 5100s but ill just save up another two weeks and order my 5100s