can i get a part noumber for the c1500 lines, a link would be even better

 

did you try bending the hard part on the chevy lines so they are more out of the way?

 

wait a minute...lol

i'm gonna have 4.25" frnt and 4.5" rear. are you guys sayin that i can bend the hard lines on the front to get what i need?? i all ready have drop brackets for the lines.

what about the rears? i just wanna be sure i got this right. if im wrong then i will by all new lines. just let me know please.

 

On my old cherokee I had a 4.5" RC lift and it flexed out just fine with just bending the hard lines straight. Probably good measure to eventually get something a little longer cuz you never know what may happen on the trail.

 

not really, I was talking about the c1500 lines, they have a hard section on the banjo fitting that is several inches long

 

I still think the YJ lines are more than enough extension. You add three inches of lift, add three inches of brake line. In fact, most three inch lift kits don't even call for the extensions. Adding three inches should be more than enough extension to provide for adequate flex without exceeding what's necessary and placing the hoses at risk of being damaged during harder rides. Anyhow, here are the part numbers for the YJ hoses:

Rear: Dorman H38845
Front Left: Dorman H38862
Front Right: Dorman H38861