XJ dome light
Thread Starter
Member
Joined: May 2016
Posts: 109
Likes: 1
From: Houston
Year: 1993
Model: Cherokee
Engine: 4.0
XJ dome light
I'm adding a bunch of lights to the inside of my XJ. Two on the ceiling and some to illuminate the floorboards. Install time is a couple of minutes.
The LED panels I'm using are cheap and bright as hell. This photo was taken without flash. Please excuse the mess, she's under construction.
With flash
Without flash
The base and diffuser cap are 3D printed and use the existing hardware to mount up there. I'm going to change the black base to grey so it blends in better. I may also do the diffuser in a lighter grey, but white does a really good job of casting that light around.
Once the design gets worked out I may offer these for sale (maybe like $5 + shipping) but for now I'll let a few go for free if anyone is interested.
The LED panels I'm using are cheap and bright as hell. This photo was taken without flash. Please excuse the mess, she's under construction.
With flash
Without flash
The base and diffuser cap are 3D printed and use the existing hardware to mount up there. I'm going to change the black base to grey so it blends in better. I may also do the diffuser in a lighter grey, but white does a really good job of casting that light around.
Once the design gets worked out I may offer these for sale (maybe like $5 + shipping) but for now I'll let a few go for free if anyone is interested.
Last edited by QuickNDirty; May 26, 2016 at 03:11 PM.
Senior Member
Joined: Feb 2014
Posts: 793
Likes: 5
From: Southgate, Michigan
Year: 1997
Model: Cherokee
Engine: 4.6 I6
I'm adding a bunch of lights to the inside of my XJ. Two on the ceiling and some to illuminate the floorboards. Install time is a couple of minutes.
The LED panels I'm using are cheap and bright as hell. This photo was taken without flash. Please excuse the mess, she's under construction.
With flash
Without flash
The base and diffuser cap are 3D printed and use the existing hardware to mount up there. I'm going to change the black base to grey so it blends in better. I may also do the diffuser in a lighter grey, but white does a really good job of casting that light around.
Once the design gets worked out I may offer these for sale (maybe like $5 + shipping) but for now I'll let a few go for free if anyone is interested.
The LED panels I'm using are cheap and bright as hell. This photo was taken without flash. Please excuse the mess, she's under construction.
With flash
Without flash
The base and diffuser cap are 3D printed and use the existing hardware to mount up there. I'm going to change the black base to grey so it blends in better. I may also do the diffuser in a lighter grey, but white does a really good job of casting that light around.
Once the design gets worked out I may offer these for sale (maybe like $5 + shipping) but for now I'll let a few go for free if anyone is interested.
CF Veteran
Joined: Feb 2011
Posts: 3,500
Likes: 0
From: Long Beach, Ca
Year: 2000
Model: Cherokee
Engine: 4.0 I6
I bought an led set from pep boys a couple years ago and the bulbs are the same size as the original. I'm sure I paid more than what I could have gotten them for online, it was more an impulse buy haha
Member
Joined: Feb 2009
Posts: 204
Likes: 1
From: British Columbia, CANADA
Year: 1999
Model: Cherokee
Engine: 4.0L
Wow those are awesome! You think the LEDs would fit into the map lights on my overhead console?
Attachment 288951
Attachment 288951
Go here: http://www.onewaylight.com/interior-led-sets/
Senior Member
Joined: Feb 2014
Posts: 793
Likes: 5
From: Southgate, Michigan
Year: 1997
Model: Cherokee
Engine: 4.6 I6
Thread
Thread Starter
Forum
Replies
Last Post
MyNamesKal
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Mar 31, 2016 06:59 AM
FS[PacNorWest]: Free Volvo Coolant bottle cap for Renix XJs
SuperRA
Engines/Tranny/T-Case
0
Mar 23, 2016 02:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)