would i run into any problems?
#1
Member
Thread Starter
Join Date: Jun 2011
Location: Des Moines, IA
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
would i run into any problems?
I am planning on a mild 2.5-3 inch lift for my dd. I might take it on trails now and then but nothing serious. I was ganna do 2 inch spacers and 3 inch lift shocks up front and 2 inch add a leaf, 1 inch shackles and 3 inch lift shocks in the back. would I run into any brake. Line problems or anything I should be worried about? The tires im using will be 30x9.5xR15s.
#3
CF Veteran
Join Date: Jul 2010
Location: 802
Posts: 4,930
Likes: 0
Received 3 Likes
on
3 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Originally Posted by ridinclassic
I am planning on a mild 2.5-3 inch lift for my dd. I might take it on trails now and then but nothing serious. I was ganna do 2 inch spacers and 3 inch lift shocks up front and 2 inch add a leaf, 1 inch shackles and 3 inch lift shocks in the back. would I run into any brake. Line problems or anything I should be worried about? The tires im using will be 30x9.5xR15s.
Only issues were with install- frozen bolts and the like, but nothing mechanical that needed attention. I did get rid of sway bars and made front disco. When at full flex on 235/75's I do rub the fronts on the upper spring perch's. So make sure bump stops are longer by as much lift as you add (generally..) or softballs in the coils, apparently.. Never seen it, but I bet it works...? maybe a touch of cut and fold trimming?
Thread
Thread Starter
Forum
Replies
Last Post
Jose Calderon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
17
09-17-2015 08:57 PM
ammonllewis1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-31-2015 11:27 AM
DanO55
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-28-2015 07:16 PM
petejeep95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-22-2015 11:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)