Will my xj currie one ton steering work for the wj knuckles or do I have to get new steering?

Thank you

Any info on this? waiting to pull the trigger on this.

Your currie steering is Inverted Y, WJ is crossover.

No, you need new steering.

Thank you much,
Do I have to get a new drop Pittman arm or will mine work?

Depends on how your track bar will be set up.

I have the Iro double shear

It will be too long. You will need to mount the track bar over the axle to get the best angles.

I have the same track bar and will be doing the swap soon ish.

My track bar is in Stock location with WJ knuckles.. no death wobble issues and no stabilizers...


And yes u will need need a new pitman arm... or a used one... WJ knuckles have more throw... A FSJ pitman arm is what everyone uses and I use... mines stock which sits real flat...

Is yours OTK or UTK?

OTK

Otk

...

My 30 is a disco axle.. nowhere to put a trac bar mount... so I tried it and has always been fine!

With stock pitman arm? Didn't think the angles would be anywhere close without crazy bump steer.

I have a FSJ pitman arm... but it's actually flat so raises that end... I'll take take a pic when I get outside for u and the op of my angles...