wiring in power doors into a base model jeep
08-09-2012, 10:11 AM
#1
Seasoned Member
Thread Starter
Join Date: Mar 2011
Location: Antioch IL
Posts: 282
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0
wiring in power doors into a base model jeep
so on my mj i have manual windows and locks, and my doors are shot, so i found some electric doors in great shape. how would i go about wiring these in, with the power windows and locks? obviously i need the harness, but where does it go into?
08-10-2012, 12:32 AM
#3
CF Veteran
Join Date: Nov 2010
Location: some small town oregon
Posts: 15,581
Likes: 0
Received 8 Likes
on
8 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
It's easy. I'll post a pic tomorrow. 2 wires plug into fuse block one purple for windows one red for locks and one ground wire
08-10-2012, 03:28 PM
#5
CF Veteran
Join Date: Nov 2010
Location: some small town oregon
Posts: 15,581
Likes: 0
Received 8 Likes
on
8 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Ok see the purple wire lower left? That's for the windows.
And the red wire on the lower right? With the 20 amp fuse is the locks. You plug the wire in and add a fuse. I took the ground wire in the harness and cut it added a connector and hooked it to the bolt on the door check so I can remove my doors.
Thread
Thread Starter
Forum
Replies
Last Post
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
09-23-2023 04:17 PM
clangstaff
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
05-30-2019 10:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
