Laxbro26

Want to put 8 lights on my 96 jeep cherokee sport. I want two on the front square bumpers 4 on a roof rack and two backup lights.

My questios:
1) how could i wire my reverse lights so they only come on when i put it in reverse. I did it on my chevy truck through the trailer wireing setup but is there a way to do it w/o that on stock wireing?

2) anyone have a wireing diagram?

3) where is the easiest way to get the roof rack lights into the cab?

4)And eventually i want to put a cb in too. I want the antenna on a mount above the taillights. Where would i put the cable though ?

UsmclovesXJ

mount it on your roofrack and buy a 9.5ft whip antenna lol my 2¢.....but to wire back up lights u need to do some wire splicing

mr white

With the reverse lights you can wire them to relays. Splice your reverse lights to the switch side of the relay and then pull a 12v off the battery and run it to the hot sides of the relays. Then put your lights in series with the relays, probably on the ground side.

I think I wrote that out correctly lol.

For the antenna question, I believe there is a black grommet close to the tail light that you can put the coax through. It's been a few years so I don't recall if there is one on the passenger side.