I'm gonna transfer over the lift from my parts xj and from what I can see its a 4.5 I was wondering
If I would have any problem If I used the same steering stuff

 

sure, it'll work but it isnt ideal.

 

I'm at 4" on stock steering. You should be fine. But you should definitely have it on your list to upgrade in the future.

 

You will have to relocate the track bar at least though

 

I'd guess that at 4.5", he has an adjustable one on the old rig and he'll be transferring that over, yes?

 

Well I was thinking of comparing all the parts once I have the new truck taken apart but I wont know for sure how that turns out until I have the time.

 

Tracbar relocation bracket and Grand cherokee tie rod best bet .

 

this is what I'm running with my 4.5" lift. semi stock steering hasnt given me any problems yet. and if it has I haven't really noticed. the rubicon track bar bracket actually set my track bar a little lower than my drag link IIRC

 

Yea running a 4.5 lift i would make sure to upgrade the following to avoid death wobble: adjustable track bar (and bracket), new tie rod , check to make sure your drag links are good

 

Does anyone know where to get new draglinks? I've looked and haven't been able to find one that'll fit a 2000 w/ a 3 inch lift

 

Any parts store...the stock ones work just fine on a 3 inch lift...been running mine with the stock set up for almost three years

 

thank you everyone