Btw - i dont mean to sound like a trumpeteer, but dealing with Jason (grimus on vendor forum) has been effortless on my side and a pleasure to work with. RC's customer service is TOP NOTCH. I am very happy i went with them for my equipment!![/QUOTE]

I agree RC (Jason) have some great costumer service!

 

Here we go. Jason sent me some discos for 2.5" tj lift. I flipped the sway bar mount upside down to gain some additional clearance. That in turn prevented the connection of the bottom open end of disco to the axle. I had to grind some of the outside of the sway bar down so the disco could swing in enough to connect to the pin. The results:

 

Oops. Hit send. O.o. Here are the results:

 

Rides well. Now, jason just needs to make a disco set up out of this for those of us with 3" lifts!!!

 

Glad u got it worked out but the ones you had looked like they were threaded all the way out. Wouldn't work if u had just closed them all the way down. By the way I'm still trying to get mine set up on my 6.5 la an I'm having a hell of a time getting that bolt out on the axle mount. Did you have to cut it off an drill it out as some people have suggested to me? I wanna get them in just haven't had the time to cut an drill an it's be great to have an easier way

 

cut and tap out the rest with a hammer and punch ...5 mins tops! then huck the pin bolts in for ur discos. done

 

They were all the way in. Promise. And the bolt: 3 days of pb blaster, wrench, ratchet, and sheer detemiination. Came right out!