what kind of spool goes on a rear d35?
#31
CF Veteran
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 6,685
Likes: 0
Received 5 Likes
on
5 Posts
Year: 92
Model: Cherokee
Engine: 4.0
Originally Posted by xjmarc
Getting broke shafts out of a lunchbox locker is a PITA. You have to disassemble the entire thing and last time I did one had to remove the carrier because 35s like to break at the splines and you can't pull the side clutches out. If you swap the axle skip the 8.8 and find something WITHOUT c-clips you'll thank yourself when you have to replace a broken shaft.
#32
CF Veteran
Join Date: Feb 2010
Location: Soddy Daisy TN
Posts: 5,420
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0L
#33
why go to an 8.8 instead of just going to a Ford 9"?
An 8.8 isn't really all that much stronger than a Dana 44 and even so with a Chrysler 8.25 the Dana 30 is still the weak link in your drivetrain.
My opinion is stick with a D30/8.25 combo until you're ready to build 60s or 44/9"
An 8.8 isn't really all that much stronger than a Dana 44 and even so with a Chrysler 8.25 the Dana 30 is still the weak link in your drivetrain.
My opinion is stick with a D30/8.25 combo until you're ready to build 60s or 44/9"
#34
CF Veteran
Join Date: Nov 2010
Location: cape cod ma.
Posts: 1,140
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 i6
here we go.....pretty soon we'll be back to full widths and rockwells.......lol
the ranger/explorer swap or just a 97+ cherokee 8.25 29 spline (i haven't broken mine yet) are the best easiest choices lug patterns are the same tracks are similar ,driveshafts ect.
the ranger/explorer swap or just a 97+ cherokee 8.25 29 spline (i haven't broken mine yet) are the best easiest choices lug patterns are the same tracks are similar ,driveshafts ect.
#35
Whoooooooooooooooooooooooooooooooooooooooooooooooo oooa!!
The OP asked about spools and this means he needs to be convinced to replace his axle?
Come on folks, let's stick with the original topic and at least try to answer the question.
The OP asked about spools and this means he needs to be convinced to replace his axle?
Come on folks, let's stick with the original topic and at least try to answer the question.
#36
My suggestion if he REALLY wants a spool would be to get a 29 spline Chrysler 8.25 and weld the spider gears together but not to the carrier and run that. It'd be cheaper and far more reliable than a spool for a Dana 35.
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
aa7kn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-23-2015 09:08 AM
CAT_Tech2
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
67
09-18-2015 08:26 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)