Using TJ springs in an XJ build?
#2
Senior Member
Join Date: Jan 2010
Location: Taylorsville, UT
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Well, the springs will fit, however thered is a lot of conflicting information on how much more or less lift they will give.
I have some TJ springs on mine that I was told were 6" and they give about 1" less than that on the XJ. They are Rusty's.
If you have the springs sitting around, you might as well put them on and see what you think. I would assume it would give you about 3" of lift. But like I said, there are threads that say it is more lift, less left, the same, etc. Also lift manufacturer will be a factor as spring rates are not all the same.
I have some TJ springs on mine that I was told were 6" and they give about 1" less than that on the XJ. They are Rusty's.
If you have the springs sitting around, you might as well put them on and see what you think. I would assume it would give you about 3" of lift. But like I said, there are threads that say it is more lift, less left, the same, etc. Also lift manufacturer will be a factor as spring rates are not all the same.
#3
Member
Thread Starter
Join Date: Dec 2011
Location: Waskom, Texas
Posts: 212
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0
The reason I ask is that I have 2 sets, one new and one with about 200 miles on them. The customer didn't like them so we swapped them out. We have stopped selling Skyjacker and have these left over. Looking to sell them.
I'll list part numbers tomorrow if anyone is interested.
I'll list part numbers tomorrow if anyone is interested.
Thread
Thread Starter
Forum
Replies
Last Post
ohio95xj
Modified XJ Cherokee Tech
3
09-11-2015 08:59 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)