Tweeked unibody question/advice
Thread Starter
Junior Member
Joined: Feb 2011
Posts: 67
Likes: 0
From: Queen Creek, AZ
Year: 1995
Model: Cherokee
Engine: 4.0 H/O, K&N CAI, bored throttle body, header, 2 1/2 custom exaust w/ Flowmaster 44 O/R
In this one I'm pointing at the passenger floor board at the location I visible see the floor pop when I hear it that connector I'm pointing at literally bounces with each pop... And it's almost always 2 at a time (out and back in?)
Thread Starter
Junior Member
Joined: Feb 2011
Posts: 67
Likes: 0
From: Queen Creek, AZ
Year: 1995
Model: Cherokee
Engine: 4.0 H/O, K&N CAI, bored throttle body, header, 2 1/2 custom exaust w/ Flowmaster 44 O/R
Last one this is the drivers roof from inside. This area was crushed in by the roof rack (along with the passengers rear that's no longer there) we pushed it out so the outside is now straight...you can see though the inside is jacked up! If anyone needs any other pics to give me advice lmk...also if someone could tell me how to post one reply with multiple pics, and the descriptions under them that would be great!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
Karmageddon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
12
Sep 15, 2015 08:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



