So Im about at my wits end with this stupid Jeep, between field training and a deployment my XJ went from month long build to over a year. Anyway I am replacing the stock Track Bar with an adjustable and I can't get the frame end to come loose. I've used a ball joint separator and put everything I've got into and and cant get it loose. Any ideas?

 

I'm assuming you got the nut off? If so try a torch, heat the **** out of the bracket, this should break some corrosion up then bash it with a hammer. You could also try to pry it out with a big pry bar.

 

Heat it red hot and take a ball joint seperator wedge it in there and take a sledge hammer hit it as hard as you can this worked for me

 

Yeah heat was my next idea, I've been PB Blasting the s*** out of it for a good few days. I tried a ball joint separator and was hanging all my weight on it and wouldnt move lol.

 

Are you just replacing the track bar or are you doin the bracket too?

 

take the bracket off the jeep and work on it out of the rig.

 

Just the bar I went cheap at first to save money but went ahead and bought an adjust. Bar