Tire size to rim size question
CF Veteran
Joined: Jun 2011
Posts: 1,845
Likes: 3
From: S.E. Tx
Year: 1992
Model: Cherokee
Engine: 4.0 I6 firepower ignition, cat-back w/ magnaflow muffler, poweraid tb spacer, optima blue top
I think that's a bit to much for a 7" wheel. Usually a 12.5" tire can go on a 8" wheel minimum, and that's not even recommended, but a lot of people do it.
CF Veteran
Joined: Feb 2010
Posts: 2,095
Likes: 3
From: Cove, OR
Year: 1993
Model: Cherokee
Engine: 4.0
Don't understand what you are asking, did you mean will a 12.5 inch wide tire fit on a 7 inch wide RIM. The answer to that question is yes it will fit on the rim, but if the rim has the stock back spacing of 5.25 inches it will rub bad, to bad in fact to be used as a spare.
Newbie
Joined: Jun 2011
Posts: 27
Likes: 0
From: Nashville, Tenneesee
Year: 2000
Model: Cherokee
Engine: 4.0
I own a tire shop. It will mount but the problem will be how bad the tire in pinched. you will get to things from this. 1) the tire will grow in overall hight and 2) the tire will not wear right do to not all the tread being put to the gound. i would not mount a 12.5 inch wide tire on anything small then a 10 wide rim
Thread Starter
Senior Member
Joined: Nov 2010
Posts: 943
Likes: 0
From: zephyrhills fl
Year: 1989
Model: Cherokee
Engine: 4.0 I6
Yes I'm sorry I ment rim duh sorry
I wouldn't care very much about the tire not wearing right. I am getting 4 used 10" wide rims and one 33x12.5" tire with about idk 30% tread. I would like to use that one worn out tire as a full sized spare on the rim that I'm using now with my spare bold 31x10.5" tire. The rim is a stock steel rim that's 15x7". If I should not do this because of a back spacing issue then I won't but if y'all think it would be a bad idea because of uneven wear then I'll still go ahead with it. Thanks for ya'lls opions
Brandon
I wouldn't care very much about the tire not wearing right. I am getting 4 used 10" wide rims and one 33x12.5" tire with about idk 30% tread. I would like to use that one worn out tire as a full sized spare on the rim that I'm using now with my spare bold 31x10.5" tire. The rim is a stock steel rim that's 15x7". If I should not do this because of a back spacing issue then I won't but if y'all think it would be a bad idea because of uneven wear then I'll still go ahead with it. Thanks for ya'lls opions
Brandon
Trending Topics
CF Veteran
Joined: Feb 2010
Posts: 2,095
Likes: 3
From: Cove, OR
Year: 1993
Model: Cherokee
Engine: 4.0
Thread Starter
Senior Member
Joined: Nov 2010
Posts: 943
Likes: 0
From: zephyrhills fl
Year: 1989
Model: Cherokee
Engine: 4.0 I6
Brandon
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



