tie rods?
#1
CF Veteran
Thread Starter
Join Date: Oct 2009
Location: Chicago IL
Posts: 5,390
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 Straigh 6
tie rods?
so in the last year i have replaced my moog tie rods 2 times. is there a steering kit out there that wont wear so fast? i was looking at a one tone kit or the ruff stuff steering. any input? im pushing around 35s
#3
Seasoned Member
Join Date: Jan 2011
Location: NJ
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 I6 Powertech
Get the ZJ tie rod from Napa or Autozone its an upgrade, but it must be from the v8 5.2 or 5.9 Grand Cherokee the 4.0 is the same as ours. Otherwise my favorite is Iron Man if you have 160$ or 200$ for the extreme one. If you have a lot money Currie one is 500$
http://www.ironman4x4fab.com/Products/TR.html
https://www.cherokeeforum.com/f2/zj-...-22717/index9/
http://www.ironman4x4fab.com/Products/TR.html
https://www.cherokeeforum.com/f2/zj-...-22717/index9/
Last edited by XJJeff; 11-30-2012 at 05:13 PM.
#4
#5
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Get the ZJ tie rod from Napa or Autozone its an upgrade, but it must be from the v8 5.2 or 5.9 Grand Cherokee the 4.0 is the same as ours. Otherwise my favorite is Iron Man if you have 160$ or 200$ for the extreme one. If you have a lot money Currie one is 500$
http://www.ironman4x4fab.com/Products/TR.html
https://www.cherokeeforum.com/f2/zj-...-22717/index9/
http://www.ironman4x4fab.com/Products/TR.html
https://www.cherokeeforum.com/f2/zj-...-22717/index9/
#6
CF Veteran
Join Date: Feb 2011
Location: Dubuque IA,Libertyville IL
Posts: 2,450
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO
http://www.ruffstuffspecialties.com/...g/34STEER.html
http://www.ballisticfabrication.com/...rs_p_1335.html
Trending Topics
#10
CF Veteran
Thread Starter
Join Date: Oct 2009
Location: Chicago IL
Posts: 5,390
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 Straigh 6
http://www.seriousoffroadproducts.co...ducts_id=89965
so this is under the knuckle? do you need to ream anything?
so this is under the knuckle? do you need to ream anything?
#11
#12
CF Veteran
Thread Starter
Join Date: Oct 2009
Location: Chicago IL
Posts: 5,390
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 Straigh 6
Yes, unless you buy this UTK kit:
http://www.seriousoffroadproducts.co...ducts_id=89921
http://www.seriousoffroadproducts.co...ducts_id=89921