Thoughts/help/advice??? :)
#1
Seasoned Member
Thread Starter
Join Date: May 2012
Location: Ft Myer, Va
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Thoughts/help/advice??? :)
Found this in the local junkyard. Its a 2000 Grand with a blown motor (4.0) auto tranny, two position t-cas (?242??) and a much less rusty Dana 30. Could you guys please look at the pics and tell me what I should grab? Is the Dana 30/brakes and better than what I have with my 96 XJ donor axle? The calipers look different? Would the auto tranny bolt right in my 01 XJ? Any other parts that I should grab while I'm at it??? Help!
#2
CF Veteran
Join Date: Jul 2010
Location: 802
Posts: 4,930
Likes: 0
Received 3 Likes
on
3 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Found this in the local junkyard. Its a 2000 Grand with a blown motor (4.0) auto tranny, two position t-cas (?242??) and a much less rusty Dana 30. Could you guys please look at the pics and tell me what I should grab? Is the Dana 30/brakes and better than what I have with my 96 XJ donor axle? The calipers look different? Would the auto tranny bolt right in my 01 XJ? Any other parts that I should grab while I'm at it??? Help!
#3
Seasoned Member
steering will be tougher than whats on your XJ, its just gonna be a PITA getting it safely supported with enough room to get to it
#4
Seasoned Member
Thread Starter
Join Date: May 2012
Location: Ft Myer, Va
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Thanks guys... Didn't realize the AW4 died out in the grand but kept going in the XJ. As for getting the axle/steering stuff, the shop will pick it up with a forklift and I can get at it easy enough. I still can't find much intel on the front axle assembly and brakes and if it is any kind of an upgrade... Still looking though.