Sway Bar Discos
#1
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Las Vegas, NV - St. George, UT
Posts: 1,314
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Sway Bar Discos
How high is the sway bar supposed to be tilted? I installed RC discos on my ~4.5" lift and wasn't sure. I think I may have it tilted upwards a little to much.
Also, the kit came with little black spacers. Anyone know what they are for? I want to make sure the sway bars are adjusted prior to mounting the bracket to secure them when disconnected.
I can post pics shortly if anyone is unsure of my question.
Also, the kit came with little black spacers. Anyone know what they are for? I want to make sure the sway bars are adjusted prior to mounting the bracket to secure them when disconnected.
I can post pics shortly if anyone is unsure of my question.
#2
Member
Join Date: Feb 2009
Location: British Columbia, CANADA
Posts: 204
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L
15 degrees IIRC. it should be specified in the instructions. if not check www.JKSMfg.com and see if you can find a .pdf of their XJ quicker disconnect instructions.
I have the JKS so I don't know what spacers RC includes. In my set there's a spacer/isolator that goes onto the pin that the bottom of the disconnect attaches to. This goes between the disconnect and the swaybar axle mount and is used to keep the disconnect from rattling around on the pin.
I have the JKS so I don't know what spacers RC includes. In my set there's a spacer/isolator that goes onto the pin that the bottom of the disconnect attaches to. This goes between the disconnect and the swaybar axle mount and is used to keep the disconnect from rattling around on the pin.
Thread
Thread Starter
Forum
Replies
Last Post
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)