Well as u can c the back is up a lot higher then the front but I did correct the front end lean but putting in new springs now the front end is lower the springs in the back are 3.5 inch and the front is 3 so I'm trying to figure out if a .75 inch coil spacer will level it out some any ideas

 

Put a 1" coil spacer in and call it a day.

 

That's what I was thinking do u know if that size lift will effect my drive shaft so that it makes noise

 

You're lifting the front, so no. You'd actually be lessening your rear ds angle by leveling the jeep.

 

Thanks for that what u think about quick disconnects for the sway bar. I'm trying to make it something fun and so far for my fist jeep its been ok