Stereo setups
CF Veteran
Joined: Aug 2010
Posts: 2,038
Likes: 4
From: DIRTY SOUTH
Year: 1991
Model: Cherokee
Engine: 4.0 ho
i didnt take out my 12's i just added another box to add to the mids and highs,so now i got 2 boxes in the back
Member
Joined: Feb 2011
Posts: 116
Likes: 0
From: NJ
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Sony HU with the flip down to put my ipod inside. door and decks are kickers, and 1 kicker 10" in a custom ported box i made so it will fill the angle of the rear seat hooked up to an alpine 350 watt amp. i want to go two 10's but need the cargo space.
only cost me only around $550 since I put in everything myself.
anyone who wants to do a system go to crutchfield and order everythiung and put it in yourself, its real easy if you can use a screwdriver and solder some wires.
only cost me only around $550 since I put in everything myself.
anyone who wants to do a system go to crutchfield and order everythiung and put it in yourself, its real easy if you can use a screwdriver and solder some wires.
Last edited by matt720; Mar 24, 2011 at 10:06 PM.
Member
Joined: Oct 2010
Posts: 212
Likes: 0
From: Spokane, WA
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by matt720
Sony HU with the flip down to put my ipod inside. door and decks are kickers, and 1 kicker 10" in a custom ported box i made so it will fill the angle of the rear seat hooked up to an alpine 350 watt amp. i want to go two 10's but need the cargo space.
only cost me only around $550 since I put in everything myself.
anyone who wants to do a system go to crutchfield and order everythiung and put it in yourself, its real easy if you can use a screwdriver and solder some wires.
only cost me only around $550 since I put in everything myself.
anyone who wants to do a system go to crutchfield and order everythiung and put it in yourself, its real easy if you can use a screwdriver and solder some wires.
Sent using CherokeeFM
Member
Joined: Nov 2010
Posts: 121
Likes: 0
From: Omaha, NE
Year: 1999
Model: Cherokee
Engine: 4.0 I6
sony deck, kicker 5.5" in the doors, 9x7 polk audio in the back, 4 orion xtr series 2 (500 rms each) alphasonik 2000 watt amp. its a little rediculous but hey i got it for little to nothing. (picture is before amp is in)
Seasoned Member
Joined: Feb 2011
Posts: 403
Likes: 0
Model: Cherokee
My jeeps been parked in NYC since I bought in Jan so Im not sure whats what speaker size wise.
According to Crutchfield there 3.5's on the dash, 5.25 in the doors, and 5.25 in the tailgate. It that true?
Has anyone done the dash replacement, if so how difficult was the install b/c I think its a WASTE to put anything in my tailgate, no pun intended!
According to Crutchfield there 3.5's on the dash, 5.25 in the doors, and 5.25 in the tailgate. It that true?
Has anyone done the dash replacement, if so how difficult was the install b/c I think its a WASTE to put anything in my tailgate, no pun intended!
Last edited by Malik3404; Mar 24, 2011 at 10:59 PM.
Seasoned Member
Joined: Feb 2011
Posts: 403
Likes: 0
Model: Cherokee
man thats ol skool if I ever seen it, a 4 pack, I remember those days, that thing must
Member
Joined: Nov 2010
Posts: 121
Likes: 0
From: Omaha, NE
Year: 1999
Model: Cherokee
Engine: 4.0 I6
yeah it does. the greatest thing is i got the subs for 25$. one of my dads friends at work had them at her house. they used to be her sons but he went off to college so i got them cheeeeep.
Thread Starter
Junior Member
Joined: Feb 2011
Posts: 60
Likes: 0
From: Peoria
Year: 1990
Model: Cherokee
Engine: 4.0
4000 RMS huh?
Member
Joined: Oct 2010
Posts: 212
Likes: 0
From: Spokane, WA
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by cherokeeduner
yah he doesnt know what hes talking about if he is running both amps at a .5 ohm load which im sure hes not it would be about 3500 rms
Sent using CherokeeFM
Last edited by Uhrinator; Mar 26, 2011 at 07:38 PM.
Thread Starter
Junior Member
Joined: Feb 2011
Posts: 60
Likes: 0
From: Peoria
Year: 1990
Model: Cherokee
Engine: 4.0
Well that Lanzar vibe292 alone produces 5000 at 2 ohms. He's running 2 ohms I'm guessing and that's 2100 per channel, according to the spec sheet. So that's 4200, plus the 800 rms alpine, which we all know probably does more like 900-1000 rms. So yeah 4000-5000 rms all the way cranked, plus 1" of herculiner all the way around?
Sent using CherokeeFM
Sent using CherokeeFM
- 2 x 1250 Watts RMS @ 4 Ohms
- 2 x 2500 Watts Max @ 4 Ohms
- 1 x 5000 Watts Max @ 4 Ohms Bridged
- 2 x 2100 Watts @ 2 Ohms RMS
- MOSFET Automatically Switches to Maintain Rated
- Power Over a Wide Range of Battery Voltages
- Stiffly Regulated PWM-Type Power Supplies
- Variable Input Level Controls for Each Pair of Cannels
- Variable High Low Pass Crossover Controls
- High-Efficiency, Heavy Aluminum Heatsink
- Remote Subwoofer Bass Control
- Electronic Crossover Network
- Bass Boost Circuit
- Bridgeable at 4 Ohms
- 2 Ohm Stereo Stable
- Silver RCA Inputs
- Line Outs for Left Right Channels
- Power Protection LED Indicators
- Advanced Protection Circuitry
- Soft Turn On/Off
- Frequency Response: 10 Hz-40 kHz
- S/N Ratio:95 dB
- Fuse: 40A x 3
- Dimensions: 10.25''W x 2''H x 23.03''L
Seasoned Member
Joined: Feb 2011
Posts: 403
Likes: 0
Model: Cherokee
^^^^^^^^ I dont know much about Lanzar to say good or bad but I do know 2x1250 @ 4ohms is a TON of power.
Now with that being said, what I do know is that much power comes with a certain price tag, and I find it hard to believe $185 is it!
If these specs are true Lanzars for EVERYONE!!!
Now with that being said, what I do know is that much power comes with a certain price tag, and I find it hard to believe $185 is it!
If these specs are true Lanzars for EVERYONE!!!
Member
Joined: Oct 2010
Posts: 212
Likes: 0
From: Spokane, WA
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by cherokeeduner
Some one needs to do their homework before saying nonsence things you are reading the max power he will never see that you dont know how to read rms power well i will help you out heres the specifications of this amp and i am sure his voltage is not at 14.4 either
[*]2 x 1250 Watts RMS @ 4 Ohms[*]2 x 2500 Watts Max @ 4 Ohms[*]1 x 5000 Watts Max @ 4 Ohms Bridged[*]2 x 2100 Watts @ 2 Ohms RMS[*]MOSFET Automatically Switches to Maintain Rated[*]Power Over a Wide Range of Battery Voltages[*]Stiffly Regulated PWM-Type Power Supplies[*]Variable Input Level Controls for Each Pair of Cannels[*]Variable High Low Pass Crossover Controls[*]High-Efficiency, Heavy Aluminum Heatsink[*]Remote Subwoofer Bass Control[*]Electronic Crossover Network[*]Bass Boost Circuit[*]Bridgeable at 4 Ohms[*]2 Ohm Stereo Stable[*]Silver RCA Inputs[*]Line Outs for Left Right Channels[*]Power Protection LED Indicators[*]Advanced Protection Circuitry[*]Soft Turn On/Off[*]Frequency Response: 10 Hz-40 kHz[*]S/N Ratio:95 dB[*]Fuse: 40A x 3[*]Dimensions: 10.25''W x 2''H x 23.03''L
Sent using CherokeeFM
Member
Joined: Aug 2010
Posts: 173
Likes: 0
From: papillion nebraska
Year: 1992
Model: Cherokee
Engine: 4.0
alright i figured i should get into this
1992 jeep xj
(winter set up)
clarion 7inch flip out
two JL audio W6 10s
1000watt mono JL amp
stinger cap
stinger 0 gauge wire
custom box infinity kappa perfects tweets and speaks in all 4 corners
JL 4 channel amp for the speakers
(summer set up)
JL marine speakers in custom half doors
1992 jeep xj
(winter set up)
clarion 7inch flip out
two JL audio W6 10s
1000watt mono JL amp
stinger cap
stinger 0 gauge wire
custom box infinity kappa perfects tweets and speaks in all 4 corners
JL 4 channel amp for the speakers
(summer set up)
JL marine speakers in custom half doors
CF Veteran
Joined: Aug 2010
Posts: 2,112
Likes: 4
From: Wantage, NJ
Year: 1995
Model: Cherokee
Engine: 4.0 I6
Well that Lanzar vibe292 alone produces 5000 at 2 ohms. He's running 2 ohms I'm guessing and that's 2100 per channel, according to the spec sheet. So that's 4200, plus the 800 rms alpine, which we all know probably does more like 900-1000 rms. So yeah 4000-5000 rms all the way cranked, plus 1" of herculiner all the way around?
Sent using CherokeeFM
Sent using CherokeeFM