Stolz

If I have a 4.5 inch lift and 32inch BFG ATs on my XJ. Do I have to get an after market "bigger" steering stabilzer. I just replaced the suspension with the same size after market shocks. I also replaced the steering stabilzer. But I bought one for a stock XJ. Would this cause the pop when I turn harder than normal?

modded96xj

No. Check ur steering box bolts and ur frame around the steering box

Demonoid369

no, search track bar. steering stabilizer doesn't do any of that
refer to top post. thats the most usual thing.

ZINGGG

Definitely look at your track bar. Try tightening the castle nut holding it to the mount and the 4 bolts holding the mount to the frame.

At 4.5" of lift, what kind of track bar do you have?

modded96xj

Everytime ive ever had an issue it was the frame around/ behind the steering box or the steering box bolts So im going off of past experiance

Demonoid369

No worries man, I'm just letting him know the more common causes of the pop.

Gee oh Dee

My popping was trac bar.

Should be real easy to figure out tho. Have someone turn the wheel back and forth while you examine...

zebvance

Mine pops and is the track bar bracket. Its loose on mine.

ZINGGG

5 minutes with a wrench can fix that

Stolz

Turns out my Trackbar is loose. And extremely rusted. So I am going to get derusting stuff. If that doesn't work I'll just saw it off and buy a new one.

Anyone recommend a trackbar for a 4.5inch lift with 32s?

evan00xj

At 4.5" of lift you should definitely have an adjustable track bar. Id look at BDS, IRO double shear, or ironman fab. Track bar is absolutely something that is vital to ensure the front axle is properly centered underneath the jeep. Dont try to get out cheap.

ZINGGG

Iron Rock Offroad, Rockkrawler, Rubicon Express, Ironman 4x4 all have awesome double sheer track bars. Don't even think about say "What about Rough Country?" or "What about Rusty's?"

Get quality the first time!

evan00xj

X2 had a rc track bar once....didn't even last a month of daily driving.

Deepwater Jeepin

I have been running a track bar setup from tnt customs (treks) that I have been really happy with. After a few years of abuse I noticed one side developed a little play in it. I took it off the other day, tightened up the joint... just like new again.

Stolz

Thanks guys, was able to tighten it back up after soaking it in WD40 for a couple days. But I will look into a new track bar soon! Thanks for the suggestions!