can you post a pic of the steering for us?

 

Holy crap.

I hope you didn't give more than a couple bucks for that.

PLEASE do not drive that on public highways.

 

Wow

 

Is that a control arm or a pool stick? Fail x.x

 

I paid 100$ for it no fail on my part I got it for a toy



Here's my DD 6.5" lift on 35 same as the other one

 

 

HOLY God!

Needs an sye BAD.

and cut the extra 6"s of u-bolt off.

 

Wow you're lucky that DS hasn't just fallen off yet...

Also does that exhaust dump at the TOP of the fuel tank? It's a good thing gasoline is a stable non-flammable compound that tolerates a lot of heat

 

No, that's the factory bend in the exhaust to clear the rear axle. If you look close you can see that it curves back down and heads out the back.

 

That jeep is scary....That's about an 8"-10" lift...please be careful. Rework the suspension on that jeep please! Before you hurt yourself or others...

 

For you to have a 6.5" lifted DD you sure don't seem to know a whole lot about these things.

What are your plans for the piece of **** Jeep?

 

good thing you saved money only paying $100. You need to be dropping some cash before you put that thing in gear. Good luck

 

this seems to be a good jeep to rip everything out from under it and start from scratch.

quite a few things are downright scary.

 

still want to see the front end pic of the steering...

starting from scratch is a great idea. obviously the po had no mechanical inclination, or even a rudimentary understanding of the laws of physics. but hell, i would have bought that thing for $100 too! that thing looks a lot cleaner underneath than mine! hope you take the advice of some of the more seasoned 4x4 'veterans' here. Even if it seems a little harsh, its really all for a good reason.

 

I see that now lol. Did that on the phone, I didn't see the other side of the pipe and expected it to be visible to the right of the bend instead of going straight away from the camera