Lol true how offen will I be on rocks???? Ummm not offen

 

What do you guys think of cutting out the inner rocker and replacing it with normal steel like 1/8 or 3/16?? Or just buy inner rocker and rusted pans lol

 

What about 2x4 then I put round tube around outside

 

It's all preference I know I used 2x6 and mine goes from the inner rocker all the way out and it just barely sticks out

 

Really hmmm, cuz I'm gonna put slider up high so idk what I wanna run... Hmm

 

For 2x6 3/16 and now do I replace the inner rocker on pass side with stock replacement or build one????

 

I would cut everything bad out and I mean everything until you get to good metal get your box beam tacked in where you want it, then see what is left to plate and just buy some 16 ga. And close everything up and weld everything up

 

There's nothing to weld box tube to with our inner fender... I comes off the floor in a L shape

 

I would need to see pictures of exactly what your having trouble with because mine sound like they were a lot different haha I had all kinds of stuff to weld to and I also put angle on mine to make it stronger under the door seam

 

 

That's the inner rocket lol

 

You will have to cut a lot of it out anyway like I said cut out what you can and get the rockers tacked up where you want them them plate everything up

 

So don't order stock inners

 

Do you plan on putting your doors back on? The inner and outer rocker panel form the seal for the door

 

Umm yes, but bottoms are getting cut off to clear Rick slider(2x6)