Shocks
#3
Caracticus Potts The Mod
Welcome to Cherokee Forum, Andrew
I'm sure someone will chime in on whether or not you can use them.......do you know the fully extended length of the shocks you have right now?
I'm sure someone will chime in on whether or not you can use them.......do you know the fully extended length of the shocks you have right now?
#4
CF Veteran
Join Date: Jul 2012
Location: Andover, VT
Posts: 2,970
Received 224 Likes
on
174 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0 L
Chances are they'll work fine on the road but will get over-extended if you try to flex. Longer shocks will be in order, or you could cheat and use bar pin eliminators to gain an inch. Don't forget about brakelines too!
#5
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
When I increased my lift from 3" to 4 1/2" I had to install new shocks, brake lines, SYE, driveshaft along with many other items to do it right.
If you plan on larger tires new gears are in order also and that is the time for a locker install also. The lift itself was the cheapest part of doing the lift it's all the extras needed. YMMV.
If you plan on larger tires new gears are in order also and that is the time for a locker install also. The lift itself was the cheapest part of doing the lift it's all the extras needed. YMMV.
#6
CF Veteran
Join Date: Feb 2016
Location: Northern New Mexico
Posts: 3,683
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
All you have to do is call them. They have a live chat. Just did that and they said the shocks aren't long enough from the 3 inch kit.
Last edited by Willys55; 01-06-2017 at 10:08 AM.
#7
Seasoned Member
Join Date: Nov 2015
Location: North Louisiana
Posts: 373
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0 HO
I looked up the specs, weren't available at most placed btw...
The front 3" shock part# 20039 is like 14.5 - 24.75 ext/collapsed
The front 4.5" shock part# 20008 is like 15 - 26 ext/collapsed
So I agree that you could add some bar pin eliminators to them and use them.
The front 3" shock part# 20039 is like 14.5 - 24.75 ext/collapsed
The front 4.5" shock part# 20008 is like 15 - 26 ext/collapsed
So I agree that you could add some bar pin eliminators to them and use them.
Thread
Thread Starter
Forum
Replies
Last Post
xj yj
Modified XJ Cherokee Tech
13
04-03-2011 12:47 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)