Seat Adjustment
#1
Senior Member
Thread Starter
Join Date: Jul 2012
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Seat Adjustment
Is it possible to lower the seat in a stock Cherokee? I am about 6' or so and my head is about hitting the roof. Wondering if there is a way to drop the seat down an inch or so. Anyone ever done this?
#2
im 6'5 and i feel your pain...my old xj was a limited and had power seats that adjusted up and down...if you could find a set of power seats at the junkyard and swap them in
#3
Senior Member
Join Date: Feb 2011
Location: orrville ohio
Posts: 822
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
im 6'2 and 325 lbs i cut my stock seat bracket removed 1'' of it and rewelded it then i drilled new holes 3'' back and re bolted it it is great i also drilled the spot welds for the door pilar moved it back and put a two door on the driver side and shortened the rear door 8.5 inches now its a fat guy approved 3.5 door
#4
Senior Member
Thread Starter
Join Date: Jul 2012
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L I6
That sounds like some really custom fabrication! Any pics?
I don't need to do all of that but it sounds like a project and a half!
I don't need to do all of that but it sounds like a project and a half!
#6
Junior Member
im 6'2 and 325 lbs i cut my stock seat bracket removed 1'' of it and rewelded it then i drilled new holes 3'' back and re bolted it it is great i also drilled the spot welds for the door pilar moved it back and put a two door on the driver side and shortened the rear door 8.5 inches now its a fat guy approved 3.5 door