I scored a brand new never installed pro comp 3" off CL for my jeep $200. It came with aal but I will be adding new rear leafs as mine are sagging, can I still use the aal with new leafs with no problems. Also it didn't come with sway bar links or tcase drop, which I will pick up. Now to find deal o some 31s. Driver floor pan and sagging roof liner need replaced, tear running boards off, looking to have this complete by end of August. The jeep is 96 with 100,600 miles runs great will probably get neon injectors and ported tb down the road. Already came with hitch so that will be great for boat and rear rack. Gotta love new toys.

 

cool? you should not need a tcase drop. and with a little luck your stock sway bar should hook up.

 

just don't disconnect the swaybar at all when you are putting the lift on... that always works

 

great thanks for the info and tips, little extra to put towards tires now.

 

Well finally got most the odd an ends I needed. Getting ready for install should be complete next few weeks. Got BPE's rear and front, 31x10.50 perelli scorpions AT's an wheels. New driver side floor pan, magnetic paint chassis saver. Front steering stabilizer shock. Headliner complete in realtree Camo. Waiting on rage roof rack. Should be complete by thanksgiving as its out of town at friends shop and only get few hrs each weekend to work on it.

 

My rear spring are sagging worse then I thought from center to wheel to fender is 16inches stock is 17.5 I found on here. Ordered new 3inch leaf pack's from Jason@RC