Rough Country ?
#1
Member
Thread Starter
Join Date: Nov 2009
Location: Dover PA
Posts: 187
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0L Power Tech I-6
Rough Country ?
I have a RC 4.5" long arm lift kit its been on my jeep for about 9 months. I like it a lot rides great with their new 2.2 shocks & performs very well in 4wheel drive. About 4 months ago I started having slop in steering checked under jeep and the drop pitman arm was moving up & down it was loose. Backed nut off & saw that I ran out of threads it couldn't be tightened anymore. I put a 3/16" washer on it put back on slop was gone. About 3 weeks ago it started again drop pitman arm loose again but not moving no were near as much. I noticed new pitman arm had a thinner profile but with washer shouldn't be issue. Its like the new pitman arm doesn't engage fully on the steering box shaft has anyone had that problem before or heard of anything similar?
#2
Cherokee Forum Vendor
Join Date: Sep 2008
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
We havent had any issues with the pitman arm, not to say you couldnt be the first haha but I am very interested in whats going on and would like to help anyway I can to get this fixed. Please contact me and we can discuss what needs to be done
Thank You
Thank You
#3
CF Veteran
Join Date: Sep 2010
Location: Salt Lake City, UT
Posts: 4,968
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
i installed a rubicon express pitman arm and had the same thing about 2-3 weeks later it was loose. I had a worn out washer, and it wasnt big enough inside diamiter so it would cause it to bottum out the nut before tightening up enough. I stepped up to another size washer and tightened it down. no problems anymore, stays tight.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)