rocker replacements
#1
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
rocker replacements
I drive a 99 xj 4dr. Driver side rocker now has a big hole from rust and part of the panel is rusted all the way through. Can I cut out the entire rocker or most of it and buy replacement panel or is there an aftermarket option? Or does it have to be custom fabbed? Thanks for the help guys ahead of time!
#2
Junior Member
You can either replace with a stock panel or you can replace the entire thing with thick walled steel.
If your Jeep is stock and you have no intentions of lifting it then just replace with stock rocker.
If you wheel your Jeep then I suggest you put up some 2x6 rectangle steel and start reading.
Both options are going to require fabrication and welding.
Option 1:
http://www.jcwhitney.com/replacement.../p3068030.jcwx
Option 2: (Some decent pictures in here)
http://www.naxja.org/forum/showthread.php?t=1055230
Option 2 makes far more sense to me. It's cheaper and it's stronger.
If your Jeep is stock and you have no intentions of lifting it then just replace with stock rocker.
If you wheel your Jeep then I suggest you put up some 2x6 rectangle steel and start reading.
Both options are going to require fabrication and welding.
Option 1:
http://www.jcwhitney.com/replacement.../p3068030.jcwx
Option 2: (Some decent pictures in here)
http://www.naxja.org/forum/showthread.php?t=1055230
Option 2 makes far more sense to me. It's cheaper and it's stronger.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Zeke P. Lucas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-30-2015 05:42 PM
EBowen95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
49
08-25-2015 08:44 PM
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-24-2015 07:48 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)