renix coil upgrades????
Thread Starter
Member
Joined: May 2011
Posts: 139
Likes: 0
From: alabama
Year: 1989
Model: Cherokee
Engine: 4.0
renix coil upgrades????
Does anyone know of any ignition coil upgrades for a renix 4.0 I found some for the h.o but I'm not sure if the coil will interchange andbody have any suggestions?????
CF Veteran
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Go to the boneyard and cut the primary wire connector (coil power and ground plug) off of an H.O. and splice it to your renix coil lead, then you can use the H.O. upgrades.
CF Veteran
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
CF Veteran
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
I have no info, but it should work as long you're able to get power to the coil. Is a renix coil the old oil filled type or the E type?
CF Veteran
Joined: Jun 2011
Posts: 2,858
Likes: 1
From: Nor-Cal
Year: 1990
Model: Cherokee
Engine: The venerable 4.0
E type... I've been thinking about doing this... just haven't tten around to it. Anyhow whether its oil filler or not that should work. All you need is power ground and signal. There is a reason I haven't done it and it has to do with the wiring uust cant remember what that is. When I'm with my jeep spending quality time I will look into it and get back to you.
Thread
Thread Starter
Forum
Replies
Last Post
neocracka
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Mar 28, 2020 05:48 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)