removing spring hardware...need help..........
03-21-2011, 09:36 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2010
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
removing spring hardware...need help..........
Here is the deal. The front spring hanger bolt is spinning in the bushing and will not come out. It actually appears as though the bolt and bushing are fused together. Ant ideas on how to get this spring off? Tried PB Blaster, pry bars and cussing but those did not work.
Also, the lower shock bolt broke....can i drill this out and replace with a bolt of adequate diameter for the shock bushing?
Also, the lower shock bolt broke....can i drill this out and replace with a bolt of adequate diameter for the shock bushing?
03-22-2011, 10:26 AM
#2
MJ>XJ
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
Research the shock problem... buy a breakers bar and don't post OEM tech in the advanced section... taking out bolts is NOT advanced... moving to OEM tech
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-05-2022 12:19 AM
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-26-2020 12:59 PM
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
01-27-2020 09:24 AM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
03-08-2016 11:33 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)