Removable Doors Using YJ/TJ/CJ Hinges?
#1
Junior Member
Thread Starter
Join Date: Aug 2011
Location: Nova Scotia, Canada
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 Liter
Removable Doors Using YJ/TJ/CJ Hinges?
Hey guys, so I'm thinking about making the doors on my XJ removable and I've seen the way most people are doing it, by cutting the stock hinges but I was wondering if it's possible to use the hinges off a CJ, TJ, or YJ and fab them up to the doors on my XJ and make it work? And if anyones done it before how did it work out?
Thanks for any help guys.
Here's a link to my build thread.
https://www.cherokeeforum.com/f46/bu...-build-100742/
Thanks for any help guys.
Here's a link to my build thread.
https://www.cherokeeforum.com/f46/bu...-build-100742/
#3
Senior Member
Join Date: Dec 2010
Location: Peterborough, Ontario, Canada
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
I'm sure with enough time, work and effort it could be done, but probably isn't worth it.. The Cherokee front doors weigh around 70-80lbs each I think (with all power options like mine), and I don't think the sheet metal of the door or body would be thick/strong enough to support the weight of the door when you bolted the hinge on..
I thought about looking into doing it with those hinges, but decided cutting the factory XJ hinges would be easier.
I thought about looking into doing it with those hinges, but decided cutting the factory XJ hinges would be easier.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
03-08-2016 11:33 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)