Remote Start
#1
Newbie
Thread Starter
Join Date: Aug 2013
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Remote Start
Hey Fellow Jeep Dudes.. Hope you might be able to help me with my remote start. I have it installed in my old 1998 Cherokee Sport And want to remove the system and install it in my 1988 Cherokee Pioneer. The system is a Code Alarm ca6151. If anyone has installed or removed one please let me know. The previous owner installed it and i'm just wanting to remove it without too much trouble. Looking to find out where he may have placed the control unit etc.. Any help or ideas would be great. Thanks guys
Last edited by ecbiker; 10-03-2013 at 03:54 PM.
#2
Junior Member
9 times out of 10 the control unit will be under the dash on the drivers side. Pull the trim under the steering wheel and the metal plate behind it. Most of the wires you need for a remote start system are on the column.
Should be pretty obvious when you see it.
When you pull it out, make sure you reconnect any factory wiring that was cut when it was installed.
Should be pretty obvious when you see it.
When you pull it out, make sure you reconnect any factory wiring that was cut when it was installed.
Thread
Thread Starter
Forum
Replies
Last Post
frantic29
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
09-26-2015 04:30 PM
Ashs1714
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-04-2015 10:14 PM
north0house
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-31-2015 09:08 PM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-25-2015 11:50 AM
Brynjaminjones
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-22-2015 05:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)