Rear stinger tire carrier?
#1
Seasoned Member
Thread Starter
Join Date: Oct 2012
Location: 3 hrs NW of Moab
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: Big 4.0L
Rear stinger tire carrier?
Is any one running a rear stinger tire carrier like this? I am thinking about building one any ideas?
#4
#5
CF Veteran
Join Date: Nov 2011
Location: SLC, Utah
Posts: 3,603
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
You wont find one cause it would make the hatch useless . You'll have to lower the stinger onto the ground and step over the tire to get into the hatch.
I am considering making a custom tire carrier for my XJ after I get rear 1/4 panel armor and putting 2 mounts on each side and using heim's as a hinge with some Tube that wraps around the hatch and connects on the sides so you can pull some pins and have it swing open to the left or right.
I want to do something like the picture below, But on an XJ
I am considering making a custom tire carrier for my XJ after I get rear 1/4 panel armor and putting 2 mounts on each side and using heim's as a hinge with some Tube that wraps around the hatch and connects on the sides so you can pull some pins and have it swing open to the left or right.
I want to do something like the picture below, But on an XJ
Last edited by Tom95YJ; 02-23-2013 at 12:11 AM.
#6
Junior Member
Join Date: Oct 2012
Location: Grover Beach CA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
I had one on my K5 and it was a pain in the a$$!! Like Tom said, every time I had to get in the back I had to drop the tire down and that got old real quick!
#7
Senior Member
Join Date: Nov 2011
Location: Manhattan, Kansas
Posts: 928
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
You wont find one cause it would make the hatch useless . You'll have to lower the stinger onto the ground and step over the tire to get into the hatch.
I am considering making a custom tire carrier for my XJ after I get rear 1/4 panel armor and putting 2 mounts on each side and using heim's as a hinge with some Tube that wraps around the hatch and connects on the sides so you can pull some pins and have it swing open to the left or right.
I want to do something like the picture below, But on an XJ
I am considering making a custom tire carrier for my XJ after I get rear 1/4 panel armor and putting 2 mounts on each side and using heim's as a hinge with some Tube that wraps around the hatch and connects on the sides so you can pull some pins and have it swing open to the left or right.
I want to do something like the picture below, But on an XJ
Trending Topics
#12
Senior Member
Join Date: Dec 2008
Location: Leeds, Maine
Posts: 532
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
I plan on doing one in a few weeks. The plan, like stated above is to install quarter guards and have mounts welded to those and attached to the bumper. We've got to work out the design, but I'll post up here as things progress.
#13
Seasoned Member
Thread Starter
Join Date: Oct 2012
Location: 3 hrs NW of Moab
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: Big 4.0L
Yep I think I am going the same route. going to make it swing to the pass side. will keep you posted
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)