reamer taper tool size
Thread Starter
Junior Member
Joined: Sep 2016
Posts: 87
Likes: 0
Model: Cherokee
reamer taper tool size
Ok so 1 ton setup, drill out knuckles to 5/8 or 11/16 if you have the drill bit. Taper with a reamer at 1.5 inches per foot or 7 degrees. What is the diameter of the widest part of the reamer supposed to be?
CF Veteran
Joined: Oct 2016
Posts: 1,535
Likes: 10
From: CA
Year: 1994
Model: Cherokee (XJ)
Why cant these questions all be asked in your other two threads on the same subject?
https://www.cherokeeforum.com/f67/tap...ly-bad-234480/
https://www.cherokeeforum.com/f67/1-ton-setup-234165/
https://www.cherokeeforum.com/f67/tap...ly-bad-234480/
https://www.cherokeeforum.com/f67/1-ton-setup-234165/