RC Quick disconnects
#1
Junior Member
Thread Starter
Join Date: Dec 2015
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
RC Quick disconnects
Hey everyone just wanted to get your opinion on these sway bar quick disconnects: Rough Country - 1128 - Front Sway Bar Quick Disconnects for 3.5-6.5-inch Lifts https://www.amazon.com/dp/B00C0XC56C..._UPGfxbAB9QXE7
Any reviews or good or bad? Mostly a trail jeep and little city driving
Any reviews or good or bad? Mostly a trail jeep and little city driving
#4
Junior Member
Join Date: Feb 2013
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Unfortunately I cant seem to get the link to work, if you go on seriousoffroadproducts.com he has a good selection to choose from. Also if you have questions he can help you find what you're looking for.
When I did my lift kit I ended up using the ones that came with it from R.E. They have a grease fitting and were easy to install, not as nice as those but I have no complaints. There is also a ton of homebrew disconnects out there.
Ex:
https://www.cherokeeforum.com/f58/cu...nnects-166906/
-W
When I did my lift kit I ended up using the ones that came with it from R.E. They have a grease fitting and were easy to install, not as nice as those but I have no complaints. There is also a ton of homebrew disconnects out there.
Ex:
https://www.cherokeeforum.com/f58/cu...nnects-166906/
-W
Last edited by W91; 04-19-2016 at 10:03 AM.
#6
Junior Member
Thread Starter
Join Date: Dec 2015
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Unfortunately I cant seem to get the link to work, if you go on seriousoffroadproducts.com he has a good selection to choose from. Also if you have questions he can help you find what you're looking for.
When I did my lift kit I ended up using the ones that came with it from R.E. They have a grease fitting and were easy to install, not as nice as those but I have no complaints. There is also a ton of homebrew disconnects out there.
Ex:
https://www.cherokeeforum.com/f58/cu...nnects-166906/
-W
When I did my lift kit I ended up using the ones that came with it from R.E. They have a grease fitting and were easy to install, not as nice as those but I have no complaints. There is also a ton of homebrew disconnects out there.
Ex:
https://www.cherokeeforum.com/f58/cu...nnects-166906/
-W
Trending Topics
#8
CF Veteran
Thread
Thread Starter
Forum
Replies
Last Post
TheKingdomofShenan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
07-02-2016 12:35 AM
dpetro1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
04-06-2016 11:55 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)