RC front bumper
03-20-2014, 10:07 PM
#1
Newbie
Thread Starter
Join Date: Jan 2014
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
RC front bumper
Today I installed my Rough country front bumper. I have a 91 cherokee and the bumper sits high. The front fender panels hang down past the bumper. It looks different then other Cherokees with the same bumper. Would it hurt anything if I cut the panels to make it flush with the bumper?
And what is this ball thing hanging down?
And what is this ball thing hanging down?
03-20-2014, 10:17 PM
#2
Newbie
Thread Starter
Join Date: Jan 2014
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
03-20-2014, 10:21 PM
#3
Member
Join Date: Aug 2013
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 I6
No it wouldn't damage anything to trim that piece of the fender, that's the most common way of doing it. Just cut it straight back from the bottom of the side marker.
As far as the "ball thing," that's your vacuum canister (vacuum ball). Just relocate it up into the engine compartment.
As far as the "ball thing," that's your vacuum canister (vacuum ball). Just relocate it up into the engine compartment.
Thread
Thread Starter
Forum
Replies
Last Post
93civEJ1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-02-2019 04:08 AM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)