I searched and searched but got no results... When I'm at full lock at the steering the tire rubs the quick disco's.. It's very weird they are installed correctly according to this site.. When I took a closer look at them I adjusted them a little bit I got the driver side to not rub but the passenger side still rubs... It almost looks like the sway bar is off to one side...And the quick disco itself looks like it's slanted and I don't know why.... I will try to upload some pictures tomorrow... Thanks guys...

 

is the front axle centered under your xj??????

 

I did not so I'm guessing I'm gonna have to center the axle

 

If axles off center then that's a good place to start for more than just the rubbing issue. I'd say get a track bar relocation bracket, unless you want a new adj. track bar, and see if that clears up issue. An alignment may be in order. Also, the sway bar needs to be as parallel to the ground as possible. If the sway bar is pulled down or pushed up to meet the disco links, that can cause rub, too..