I think if I ever need to replace them again I'll do it in the garage. I know that's level ground. But all in all wasn't too bad replacing them.

 

i used to have to struggle really hard with mine from RE. then, a fellow jeeper told me to put vaseline on the bushing. its not going to help if they are not adjusted properly, but it did help me.
i re-apply once a year

 

I cant believe yall have issue getting the sway bar back on. Ditch the instructions. Measure each side from bullet pin to sway bar to make sure the disconnects are the same size. After that when its time to put back on, do one side and then use muscle to get the next side on. Ive done my jks on hills, rocky terrain etc, and it works.