Prep for bedliner
#1
Senior Member
Thread Starter
Join Date: Dec 2011
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Prep for bedliner
So I stripped my interior for bedliner. Any rust I cut out and welded new metal in. Then stripped it to Bare metal and a coat of self etching primer. I'm on break so I won't work for 2weeks but I plan on spraying next month. I'm fairly sure I'm going to need to reclean the primer once I'm back. How should I reclean the primer
#5
CF Veteran
Join Date: Oct 2010
Location: Long Island N.Y.
Posts: 1,889
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: I6 4.0
I would just wipe it down and make sure its dry and clean form any debris and use roll on bedliner for the floors preferably chassis saver its the best stuff out there
#7
Senior Member
Thread Starter
Join Date: Dec 2011
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I have ALS liner already. Have had real good experience with it. What I. Saying though is the directions say spray bare metal with self etching primer then spray.
I clean the metal then sprayed primer. There is a layer of dust already on the primer after two days. I tried air but it doesn't blow it off. A shop vac works but it scratches the primer.
My question I'm trying to ask is what should I use to clean the primer of dirt and what nit.
I clean the metal then sprayed primer. There is a layer of dust already on the primer after two days. I tried air but it doesn't blow it off. A shop vac works but it scratches the primer.
My question I'm trying to ask is what should I use to clean the primer of dirt and what nit.
Trending Topics
#10
questions about prepping for chassis saver and monstaliner
sorry to hijack this thread im new here and just got a 99 cherokee. I have my interior pulled and im trying to get out the black glue stuff under the aluminum tape ...whats the best way to remove that? also should i pull the drain plugs and paint the chassis saver and monstaliner and then put them back in or paint over them....any help would be greatly appreciated ok thanks a bunch!
#11
Seasoned Member
Join Date: Mar 2013
Location: Las Vegas NV.
Posts: 461
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 I6 High Output
Just air blow the dust and debri off, then bedline the heck out of it. No need to worrie since the bed liner has a rough feel and look to it. Re-prim if needed.
#12
CF Veteran
Join Date: Nov 2008
Location: mass
Posts: 1,021
Likes: 0
Received 3 Likes
on
2 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 high output
sorry to hijack this thread im new here and just got a 99 cherokee. I have my interior pulled and im trying to get out the black glue stuff under the aluminum tape ...whats the best way to remove that? also should i pull the drain plugs and paint the chassis saver and monstaliner and then put them back in or paint over them....any help would be greatly appreciated ok thanks a bunch!
#13
thanks you guys
ok def will pull the plugs then , just bought some mek had to drive half an hour to get it but i read it should make short work of the sound deadener thats under the carpet plus ill use it to wipe everything down after i sand alrighty thanks again for your fast responses!
Thread
Thread Starter
Forum
Replies
Last Post
Jeepster86
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-31-2015 04:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)